Qlogic QLE2362 Guide d'installation télécharger pdf (Page 14)

EMC Host Connectivity with QLogic Fibre Channel and iSCSI (HBAs) and (CNAs) for the Linux Environment

Introduction

Zoning

When using Linux hosts in a fabric environment, the zoning must be

set up as single initiator and single target zoning. A single

initiator/single target zone is composed of one adapter and one EMC

storage array port. Storage array ports can be shared among adapters;

however, each adapter must be in its own zone.

Note: Multi-initiator zones are not recommended in a Linux fabric

environment.

EMC storage array-specific settings

Refer to the EMC Host Connectivity Guide for Linux, available at

http://Powerlink.EMC.com, for EMC storage array-specific settings.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 121 122

Pas de commentaire

Qlogic QLE2362 Guide d'installation Page 14