Qlogic QLA2310F Guide de l'utilisateur télécharger pdf (Page 17)

FC2354603-00 A 3-1

Section 3

Troubleshooting

3.1

Problems After Installation

There are three basic types of installation problems that can cause your

QLA2310F/2310FL HBA to function incorrectly: hardware problems, system

configuration problems, and Fibre Channel problems. The following section

provides itemized checklists to help you determine why your QLA2310F/2310FL

HBA is not functioning.

3.2

Hardware Problem Checklist

■ Are all of the circuit cards installed securely in the system?

■ Are all of the cables securely connected to the correct connectors? Be sure that

the FC cables that attach from the QLA2310F/2310FL HBA connectors to the

device are connected correctly. For example, the optical transmit connector on

the QLA2310F/2310FL HBA must be connected to the optical receive connector

on the device. Some connectors require a firm push to ensure proper seating.

An easy way to check for correct seating is to switch the connectors on either

the QLA2310F/2310FL HBA or the device, then restart your system. If the BIOS

is enabled, devices attached to the QLA2310F/2310FL HBA are displayed on

the screen.

■ Is the QLA2310F/2310FL HBA installed correctly in the PCI slot? Is it seated

firmly in the slot? PCI and PCI-X slots look the same. If the PC contains both

PCI and PCI-X slots, refer to the PC manufacturer’s instructions to determine

the slot type.

■ Check for interference due to nonstandard PCI connectors.

■ Is the Fast!UTIL data rate setting correct? See the appropriate readme.txt file

for information about setting the data rate.

■ Are all external peripherals properly powered up? See the appropriate readme.txt

file for information about displaying attached devices.

1 2 ... 12 13 14 15 16 17 18

Pas de commentaire

Qlogic QLA2310F Guide de l'utilisateur Page 17