Qlogic QLA22xx board Guide de l'utilisateur télécharger pdf (Page 105)

7 – Setting Up Connections

Comparing Host Configurations

FS0054601-00 E 7-39

7.10

Printing a Host Configuration

Perform the following steps to print a host configuration:

1. From the SANblade Manager main window, do the following:

a. In the HBA tree, select the host (or adapter, device, or LUN connected to

the host).

b. Do one of the following:

❑ Click the Configure button on the toolbar.

❑ Right-click the host (or adapter, device, or LUN connected to the host) in

the HBA tree. From the pop-up menu, select Configure.

The Fibre Channel Configuration dialog box displays (see figure 7-3).

2. From the File menu, select Print.

3. Select the printer and print the configuration.

7.11

Comparing Host Configurations

The compare host features allows you to visually see the changes happening to

your SAN: devices being added, devices being removed, BIOS updates, and

adapter updates.

Perform the following steps to compare the current host configuration (online) to a

previously saved host configuration file (offline) (see section 7.9.1).

1. From the SANblade Manager main window, do one of the following:

❑ From the Host menu, select Compare Host.

❑ Press CTRL+SHIFT+C.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 187 188

Pas de commentaire

Qlogic QLA22xx board Guide de l'utilisateur Page 105