Qlogic QLA2342 Guide de l'utilisateur télécharger pdf (Page 18)

EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris Environment

Installing and Configuring the HBA and Driver

8. Reboot the host with the reconfigure option:

reboot -- -r

Driver-related issues

Note these issues (and resolutions) related to installing a QLogic

adapter:

Scenario 1 — The Sun qlc driver is present in the host system

To add the QLogic adapter(s) into a host system that has the Sun qlc

driver:

1. Install the EMC-qualified QLogic driver into the host system.

2. Halt the host system and power it off.

3. Install the QLogic adapter(s).

4. Boot the system with the reconfigure option (

boot -r).

Scenario 2 — The server already contains a QLogic HBA that is controlled by the Sun qlc

driver

If the additional adapter is installed before installing the QLogic

driver, both adapters will be initially controlled by the Sun qlc driver.

When the QLogic driver is installed it will indicate that it is installed

but has failed to attach. This is okay, since the driver will attach itself

to the second adapter after a reboot with the reconfigure option

(

reboot -- -r) .

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 61 62

Pas de commentaire

Qlogic QLA2342 Guide de l'utilisateur Page 18