Qlogic SANsurfer FC HBA Manager Guide de l'utilisateur télécharger pdf (Page 112)

11 – Updating the HBA

Configuring an HBA’s Firmware Values

11-6 IS0054602-00 A

5. The save firmware parameters message displays (see figure 11-4). Click OK.

Figure 11-4. Save Firmware Parameters Message

NOTE: The revised settings do not apply to currently configured targets. To

apply the revised settings to a configured target, you must delete and

configure the target after the HBA is reset.

6. The Firmware Parameters dialog box still displays. Click Close.

7. Save the changes (the HBA automatically resets). Do one of the following:

❑ In the HBA Options tabbed page, click Save HBA.

❑ Right-click in the HBA tree. From the drop-down menu, click Save HBA.

8. The Security Check dialog box displays. In the Enter Password box, type the

password. Click OK.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 151 152

Pas de commentaire

Qlogic SANsurfer FC HBA Manager Guide de l'utilisateur Page 112