Qlogic QLE4062C Manuel d'utilisateur Page 10

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 11
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 9
White Paper
5. Next, tell MPxIO driver to accept the device based on the SCSI vendor and
Product-ID by editing /kernel/drv/scsi_vhci.conf file. Add the following settings
in the tail of the file.
# vi /kernel/drv/scsi_vhci.conf
...
device-type-scsi-options-list=
“Qsan P210C”, “symmetric-option”; // 4 spaces must be kept
// between Qsan and
symmetric-option = x01000000; // P210C
In order to find out the SCSI vendor and Product-ID, use format command and
select one of the instances in device.
format> inquiry
Vendor: Qsan
Product: P210C
Revision: 1.0.
Beware that the MPxIO driver accepts the vendor name as 8 character-words
only. So the vendor name must be added 4 spaces at the end of “Qsan” in
/kernel/drv/scsi_vhci.conf file.
6. A reboot is necessary to let all settings validate.
# reboot -- -r
7. After rebooting, these iSCSI disks will be merged to one MPIO device.
# format // Before MPxIO applied,
// OS detects the
sameSearching for disks... // LUN as two independent
// disks.
...
AVAILABLE DISK SELECTIONS:
0. c1t1d0 <ATA-HDS728040PLA320-A69A cyl 5003 alt 2 hd 255 sec 63>
/pci@0,0/pci108e,5348@7/disk@1,0
2. c3t266d0 <DEFAULT cyl 1303 alt 2 hd 255 sec 63>
/iscsi/disk@0000node10000,0
3. c3t267d0 <DEFAULT cyl 1303 alt 2 hd 255 sec 63>
/iscsi/disk@0000node10000,0
Specify disk (enter its number):
# format //
After MPxIO applied,
// two disks c3t266d0 and
Searching for disks... // c3t267d0 are merged to
// c4t2436001378A6D1B6d0
...
AVAILABLE DISK SELECTIONS:
0. c1t1d0 <ATA-HDS728040PLA320-A69A cyl 5003 alt 2 hd 255 sec 63>
/pci@0,0/pci108e,5348@7/disk@1,0
1. c4t2436001378A6D1B6d0 <DEFAULT cyl 1303 alt 2 hd 255 sec 63>
/scsi_vhci/disk@g2436001378a6d1b6
Specify disk (enter its number):
Performance test
- 10 -
Vue de la page 9
1 2 ... 5 6 7 8 9 10 11

Commentaires sur ces manuels

Pas de commentaire