Qlogic QLogic 12000 Series Spécifications Page 81
- Page / 144
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Switch Command Line Interface
Groups and Commands
D000103-000 E 1-73
Valid Values for TClass are 0 to 0xff
smGidPrefix
Set the Subnet Prefix (default=0xfe80000000000000).
Syntax:
Options:
Sample Output:
NOTES: Use this command to set the subnet prefix of the SM. The SM must be
offline and the subnet prefix value is 8 byte hex. The subnet manager must be
running to display default multicast group information.
smSubnetSize
Set/display the subnet size for the subnet manager.
Syntax:
Options:
Sample Output:
NOTES: Use this command to tune the SM to handle the configured fabric size.
The subnet manager must be running to display subnet size information.
smTopoErrorThresh
Set/display the error threshold for a topology sweep.
Syntax:
smGidPrefix [prefix]
None.
-> smGidPrefix
Subnet Prefix: 0xfe80000000000001
smSetSubnetSize
None.
-> smSubnetSize
smTopoErrorThresh
- QLogic 12000 Series 1
- Document Revision History 2
- Table of Contents 3
- Intended Audience 5
- Documentation Conventions 5
- License Agreements 6
- Technical Support 6
- Training 7
- Contact Information 7
- Knowledge Database 7
- viii D000103-000 E 8
- 1 Switch Command Line 9
- Switch Command Line Interface 10
- 1-2 D000103-000 E 10
- D000103-000 E 1-3 11
- Online Help 12
- Keyboard Shortcuts 12
- Operator access: operpass 13
- -> reboot 17
- Disruptive reboot selected 17
- Proceed with reboot? [N] 17
- -> swapBsDel 20
- The new prompt 21
- -> case off 22
- Case sensitivity is now off 22
- -> showLastRetCode 22
- Last Exit Code: 0: Success 22
- Text to be echoed 23
- Chassis slot number 24
- -> user operator 25
- User changed to: operator 25
- -> passwd operator1 26
- -> userAdd admin Bob 26
- User added: Bob 26
- -> sshKey show 28
- Index Key 28
- "192.168.0.1" 29
- -> setldapSvrPort 389 30
- -> idleTimeoutGet 30
- Timeout is 600 seconds 30
- -> sessionTimeoutDisable 31
- -> sessionTimeoutEnable 32
- Enabled session idle timeout 32
- -> loginMsgGet 32
- Clear welcome message 33
- Set the login name 34
- Clear the login name 34
- Enable or disable ftp access 35
- -> IpoIbConfigShow 37
- -> IpoIbConfigEnable 37
- -> IpoIbConfigDisable 37
- -> IpoIbAddressShowIPv6 39
- -> hwCheck 40
- Chassis hardware status: GOOD 40
- Use 0 or 1 to set the format 42
- -> setIBNodeDescFormat 43
- Format = 0 43
- -> fruInfo 43
- MasterMM202-> chassisQuery 44
- System contact string 45
- System name string 46
- System location string 46
- The network interface name 47
- -> showChassisIpAddr 50
- Network mask length. (0-128) 51
- -> showChassisIpv6Addr 52
- -> autoConfIPv6Enable 52
- -> autoConfIPv6Disable 52
- -> autoConfIPv6Show 53
- -> ndpShow 53
- -> showDefaultRoute 53
- D000103-000 E 1-47 55
- -> hostShow 56
- DNS Resolver : Disabled 59
- Firmware 60
- -> fwListFiles 62
- Listing Directory /firmware: 62
- All slots in the chassis 64
- Slot number 64
- Subnet Management 67
- Saving 68
- Saving complete 68
- -> smPriority 69
- The SM Priority is 0 69
- -> smSweepRate 300 69
- -> smForceSweep 70
- -> bmForceSweep 70
- -> smMasterLMC 74
- -> smShowMasterLid 74
- The SM LID is 0x0001 74
- -> smSwitchLifetime 15 76
- -> smHoqLife 9 76
- -> smVLStall 5 77
- -> smInfoKey 79
- -> smMgmtKey 0x11 79
- Clears all set options 80
- -> smGidPrefix 81
- -> smSubnetSize 81
- -> smTopoErrorThresh 100 82
- -> smTopoAbandonThresh 3 82
- -> smNonRespDropSweeps 3 84
- -> smNonRespDropSweeps 84
- -> smLogLevel 4 84
- -> smLogMode 1 85
- -> smLogMask SM 85
- -> smMcLidTableCap 1024 86
- Set mc lid limit to 1024 86
- -> smMcLidTableCap 86
- Mc lid limit: 1024 86
- -> smAppearanceMsgThresh 91
- -> smAppearanceMsgThresh 3 91
- -> pmShowCounters 94
- -> pmResetCounters 94
- -> pmShowRunningTotals 94
- Restore normal SM priority 96
- Restore normal BM priority 96
- Restore normal PM priority 96
- 1-90 D000103-000 E 98
- -> logClear 100
- Ram Log cleared 100
- Groups and Commands 101
- D000103-000 E 1-93 101
- Sample Output: 101
- -> logResetToDefaults 102
- D000103-000 E 1-95 103
- -> logSyslogTest -e 105
- Key Management 106
- D000103-000 E 1-99 107
- Options: 107
- IbSwitchInfo 108
- D000103-000 E 1-101 109
- -> ismPortCounters -errors 110
- No ports with symbol errors 110
- Switch identifier 113
- -> ismAutoClearConf enable 114
- Auto clear is enabled 114
- -> ismPortSet12x S1AL01a 114
- S1AL01a 12x mode is DISABLED 114
- Port name 116
- 1=enable, 0=disable 117
- 4=2048 bytes, 5=4096 bytes 119
- The numeric threshold value 122
- -> ismRemoveStateDump all 124
- 1=on, 0=off 127
- -> ismChassisBounce 128
- TimeManagement 130
- New timeout setting 132
- New refresh delay setting 132
- D000103-000 E 1-125 133
- A read-only community string 134
- RFC 2573 135
- SNMP-TARGET-MIB, RFC-2573 136
- CaptureInfo 140
© 2020, manymanuals.fr. Tous droits réservés | 0.039 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels