Qlogic SANbox-16STD Installer's/ Guide d'installation télécharger pdf (Page 34)

24 Sun StorEdge SAN 4.0 Release Installation Guide • July 2002

13. Install fcip driver patch 111096-04.

14. Install qlc driver patch 111097-10.

15. Install specfs patch 111588-03.

Patch 111588-03 may have been installed with your operating system. Use the

showrev command to see if has already been installed

16. Install cfgadm plug-in library patch 111846-04.

17. Reboot the system.

For each of the storage devices, upgrade the software, firmware, or configuration.

The components should be upgraded to the revision levels outlined in Table 3-1

“Minimum Software Component Versions and Patches” on page 11.

After performing the above steps, you can leverage additional features provided by

the Sun StorEdge SAN 4.0 Release. You can configure the SAN for:

■ 2 Gb Switches

■ 2 Gb Host Bus Adapters

■ Heterogeneous Switches

■ Large Configuration Support

# patchadd patch-location/111096-04

# patchadd patch-location/111097-10

# patchadd patch-location/

111588-03

# showrev -p | grep 111588

# patchadd patch-location/111846-04

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40 41 42

Pas de commentaire

Qlogic SANbox-16STD Installer's/ Guide d'installation Page 34