Qlogic QLE2362 Guide d'installation télécharger pdf (Page 76)

EMC Host Connectivity with QLogic Fibre Channel and iSCSI (HBAs) and (CNAs) for the Linux Environment

Installing and Configuring the Linux Host with the QLogic Driver

Example:

alias parport_lowlevel parport_pc

alias eth0 eepro100

alias scsi_hostadapter cpqarray

alias scsi_hostadapter1 cpqarray

alias scsi_hostadapter2 qla2300

alias scsi_hostadapter3 qla2300

options scsi_mod max_scsi_luns=255 scsi_allow_ghost_devices=1

options qla2300 extended_error_logging=1

4. After the modification to /etc/modules.conf has been made, a

new ramdisk needs to be created and the host rebooted.

To create a new ramdisk, type the

mkinitrd command:

• For Red Hat, type:

cd /boot

mkinitrd –v initrd-$1.img $1

where $1 is the v2.4.x kernel version currently running.

Example:

cd /boot

mkinitrd initrd-2.4.21-37.ELsmp.img 2.4.21-37.ELsmp

• For SuSE, type:

cd /boot

mkinitrd –i initrd-$1 -k vmlinuz-$1

where $1 is the v2.4.x kernel version currently running.

Example:

cd /boot

mkinitrd -i initrd-2.4.21-286-smp -k vmlinuz-2.4.21-286-smp

5. Reboot the host.

QLogic v8.x-series driver parameters

The QLogic driver contains a number of parameters that may be

modified, such as debug.

IMPORTANT

EMC does not recommend changing these parameters and defaults

should be left as is.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 121 122

Pas de commentaire

Qlogic QLE2362 Guide d'installation Page 76