Qlogic SANblade 2300 Series Guide de l'utilisateur télécharger pdf (Page 84)

6 – Troubleshooting

System Configuration Problem Checklist

6-2 FC2354601-00 J

6.3

System Configuration Problem Checklist

All PCI-compliant and PCI-X-compliant systems automatically detect 32-bit or 64-bit

HBAs and set the appropriate bus speed (for example, 33 MHz or 133 MHz). Check

the motherboard for proper configuration (see the appropriate installation section

for more information.

See the documentation supplied with your computer, or contact your computer

dealer to determine if your motherboard requires special configuration.

6.4

Fibre Channel Problem Checklist

■

Were all of the FC devices powered up before you powered up the PC?

■

Check that all cables are properly connected.

■

Have you configured your RAID controller using the utilities provided by the

manufacturer?

■

Some Fibre Channel switches support zoning. Make sure that your switch is

configured correctly.

■

Make sure that data rate setting on the QLA23xx matches the target device. For

example, if the QLA23xx is set to 2 Gb, set the target device to 2 Gb

■

If you are using a RAID box, modify the following settings in Fast!UTIL:

❑

Port Down Retry Count = 60

❑

Execution Throttle = 100

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 167 168

Pas de commentaire

Qlogic SANblade 2300 Series Guide de l'utilisateur Page 84