Qlogic QLA4010 Guide d'installation télécharger pdf (Page 80)

2-4

EMC Fibre Channel and iSCSI with QLogic HBAs in the Windows Environment

Planning, Miscellaneous Procedures, and Troubleshooting

Figure 2-2 SANsurfer iSCSI HBA Manager, HBA Options

Configuring iSNS settings for QLA4010

For iSNS support, the QLA4010 must be running the correct driver

(see the EMC Support Matrix for latest version.)

Targets must register with the iSNS server. To register, enable the

iSNS server and enter the IP address using the SANsurfer iSCSI

HBA Manager, HBA Options, Network, Enable iSNS dialog box.

Click Save HBA under the Network tab on the SANsurfer iSCSI

HBA Manager, HBA Options tab.

The target should be detected by SANsurfer and shown on the SAN-

surfer iSCSI HBA Manager, Target Settings tab. Click SAVE Set-

tings to bind the targets. If the targets are not detected, follow these

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 117 118

Pas de commentaire

Qlogic QLA4010 Guide d'installation Page 80