Qlogic QLA2100F Guide de l'utilisateur télécharger pdf (Page 41)

100

101

Chapter 1. Implementing Fibre Channel host adapter cards 27

6. From the Advanced Adapter Settings menu, press the Down Arrow to

highlight LUNs per target. Press Enter.

7. Press the Down Arrow to find and highlight 256. Press Enter.

8. Press Esc.

9. To save the changes, click Yes. Press Enter.

10.Restart the server.

1.8.2 Installing the QLogic QLA2200F adapter card

This section tells you how to attach an ESS to a Novell NetWare host system

with the QLogic QLA2200F adapter card. Single-and dual port Fibre Channel

interfaces with the QLogic QLA2200F adapter card support the following public

and private loop modes:

򐂰 Tar ge t

򐂰 Public initiator

򐂰 Private initiator

򐂰 Target and public initiator

򐂰 Target and private initiator

Perform the following steps to install the QLogic QLA2200F adapter card:

1. Install the QLogic QLA2200F adapter card in the host system.

2. Connect the cable to the ESS port.

3. Restart the server.

4. Press Alt+Q to get to the FAST!Util Command panel.

5. From the Configuration Settings menu, click Host Adapter Settings and set

the parameters and values from the Host Adapter Settings menu as follows:

a. Host adapter BIOS: Disabled

b. Frame size: 2048

c. Loop reset delay: 5 (minimum)

d. Adapter hard loop ID: Disabled

6. From the Advanced Adapter Settings menu, press the Down Arrow key to

highlight LUNs per target; then press Enter. Set the parameters and values

from the Advanced Adapter Settings menu as follows:

Note: The following steps are an example of a configuration. The

configuration for your adapter might differ.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 405 406

Commentaires sur ces manuels

Pas de commentaire

Qlogic QLA2100F Guide de l'utilisateur Page 41

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Qlogic QLA2100F