Qlogic Fibre Channel HBA and VM Spécifications télécharger pdf (Page 11)

FC0054605-00 A 2-1

2 NPIV Deployment

Requirements

The following sections list the hardware and software requirements that must be

met before deploying a QLogic NPIV solution on Microsoft Windows Server 2008

Hyper-V.

Hardware Requirements

 NPIV Enabled FC Adapter. QLogic 2400 series (4Gb) or 2500 series (8Gb)

Fibre Channel adapter.

 NPIV Enabled FC Switch. Use one of the following:

 QLogic SANbox

5600 (4Gb) stackable Fibre Channel switch

 QLogic SANbox 5800 (8Gb) stackable Fibre Channel switch

 QLogic SANbox 9000 modular Fibre Channel switch

 Any NPIV-enabled Fibre Channel switch

 Server Hardware. Microsoft recommended server configuration for

Microsoft Windows Server 2008 Hyper-V and System Center VMM2008.

Software Requirements

 QLogic FC Adapter Driver. STORport miniport version 9.1.7.16 or higher

 QLogic FC Switch Firmware. Version 6.8.0.03 or higher

 Microsoft Windows Server 2008 Hyper-V. All required components

 Microsoft System Center VMM2008. All required components

NOTE:

Hyper-V requires processor virtualization extensions (Intel

-VT and

AMD

-V). These extensions must be enabled, along with the No-Execute

(NX)/Data Execution Prevention (DEP) feature.

See Appendix C to determine of your system meets these requirements.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 41 42

Pas de commentaire

Qlogic Fibre Channel HBA and VM Spécifications Page 11