Qlogic Fibre Channel NPIV Storage Networking Guide Spécifications télécharger pdf (Page 30)

3-Fibre Channel SAN Preparation

Host Presentation (Mapping) of Storage LUN

3-4

After creating a LUN, mount a volume in the LUN. (For more information, see the

HP storage array documentation).

NOTE:

The LUN must be an NTFS formatted LUN.

The LUN is then mapped (or presented/masked) to the host server. For the HP

MSA array, this is accomplished by mapping the LUN to the host bus adapter

port, as shown in Figure 3-3.

Figure 3-3. Mapping a LUN to the Host

In Figure 3-3, the HP MSA Storage Management Utility displays two LUNs, each

with one volume mounted. Additionally, all hosts (Fibre Channel adapter ports)

discovered by the storage are also displayed.

NOTE:

As a best practice for NPIV SAN migration, create a separate LUN for each

guest VM running under Hyper-V.

The LUN in this example is vd01_1000.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 77 78

Pas de commentaire

Qlogic Fibre Channel NPIV Storage Networking Guide Spécifications Page 30