Qlogic QLA4010 Guide d'installation télécharger pdf (Page 40)

1-26

EMC Fibre Channel and iSCSI with QLogic HBAs in the Windows Environment

Installation and Configuration

If the firmware is listed as a series of zeros, and "AUX" is listed next to

the firmware field at the top of the report (as shown in Figure 1-22),

this indicates the EFI boot code has not yet been installed on the

HBA(s). Proceed as follows:

Installing the EFI boot code driver and non-volatile RAM settings on the

HBA(s)

The EFI boot code driver must be loaded onto the HBA(s) in order to

be used by the EFI BIOS.

Type

efiutil all ew=qlNNNNef.bin, where NNNN refers to the

chipset version on the HBA (in the example shown in Figure 1-22 on

page 1-25, 2312 refers to the chipset present on QLA2340/QLA2342

HBAs) and press Enter.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 117 118

Pas de commentaire

Qlogic QLA4010 Guide d'installation Page 40