Qlogic QConvergeConsole CLI 2400 Series Guide de l'utilisateur télécharger pdf (Page 86)

5–Fibre Channel Noninteractive Commands

-kr (Run Read/Write Buffer Test)

5-18 SN0054667-00 C

-kr

(Run Read/Write Buffer Test)

Use the -kr command to do a read/write buffer test.

To do a read/write test using the default parameters, issue the following

command:

# qaucli -pr fc -kr (<hba instance> | <hba wwpn>)

To do a read/write test with customized parameters, issue the following command:

# qaucli -pr fc -kr (<hba instance> | <hba wwpn>) [(-EX | -EXCLUDE)

Where:

“Run a Read/Write Buffer Test” on page 5-18 contains command line examples

and test results for a read/write buffer test.

Run a Read/Write Buffer Test

This test runs on all devices or on the devices you select on the adapter you

select. This test sends the SCSI Write Buffer command to the target devices and

uses the SCSI Read Buffer command to read the returned data and do a data

comparison.

hba instance = Adapter number (use -g command to find)

hba wwpn = World wide port name of the adapter

-ex or -exclude = World wide port name of the target device that is

excluded from the read/write test

param name = One of the following:

 DataPattern

 DataSize

 TestCount

 TestIncrement

 OnError

param alias = One of the following:

 DP

 DS

 TC

 TI

 OE

param value = Value for selected parameter (see Tab le 5- 6)

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 365 366

Pas de commentaire

Qlogic QConvergeConsole CLI 2400 Series Guide de l'utilisateur Page 86