Qlogic QLA22xx board Guide d'installation télécharger pdf (Page 8)

Before You Install 1 – Introduction

1-2 FC0153302-00 D

1.2

Before You Install

Before you install the software drivers, you need to:

❑ Locate and download the appropriate drivers for your operating system.

The latest version of the QLA22xx drivers for the following operating

systems are located on the QLogic web site, http://www.qlogic.com.

❑ Santa Cruz Operations (SCO) UnixWare 7.0 and 7.1

❑ NetWare 4.X and 5.X

❑ Windows NT 4.0

❑ Windows 2000

❑ Solaris SPARC v2.6 and 7

❑ Solaris x86 v2.6 and 7

❑ Red Hat Linux 6.0 and 6.1 kernel (versions 2.2.X and above), and

6.2 kernel (versions 2.2.14-5.0 and 2.2.14-6.1)

NOTE: QLogic drivers are self-extracting and meant to be downloaded

onto diskettes. The installation instructions in this guide assume

that the QLogic drivers reside on diskettes.

❑ Read through this guide to determine which drivers you want to install.

1.3

General Description

Software drivers for the following operating systems are provided for your

QLA22xx board:

❑ Santa Cruz Operations (SCO) UnixWare versions 7.0 and 7.1

❑ Novell NetWare versions 4.X and 5.X

❑ Windows NT version 4.0

❑ Windows 2000

❑ Solaris SPARC v2.6 and 7

❑ Solaris x86 v2.6 and 7

❑ Red Hat Linux 6.0 and 6.1 kernel (versions 2.2.X and above), and 6.2 kernel

(versions 2.2.14-5.0 and 2.2.14-6.1)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 47 48

Pas de commentaire

Qlogic QLA22xx board Guide d'installation Page 8