Qlogic QLE2362 Guide d'installation télécharger pdf (Page 105)

Device reconfiguration procedures

105

Additional Notes

Device reconfiguration procedures

There are three methods to reconfigure the devices added or removed

in the system.

Method 1:

Reboot the system :

shutdown -r now

Method 2:

Remove and reinsert the modular driver

For example:

modprobe -rv qla2400

modprobe -v qla2400

Method 3:

Use QLogic script to dynamically scan the devices. QLogic has the

QLogic FC HBA LUN Scan Utility which is available from the

EMC-approved site on the QLogic website.

Usage examples

◆ To re-scan all the adapters, enter one of the following commands:

# ./ql-dynamic-tgt-lun-disc.sh

# ./ql-dynamic-tgt-lun-disc.sh -s

# ./ql-dynamic-tgt-lun-disc.sh --scan

◆ To re-scan and remove any lost LUNs, enter one of the following

commands:

# ./ql-dynamic-tgt-lun-disc.sh -s -r

# ./ql-dynamic-tgt-lun-disc.sh --scan --refresh

To invoke the menu, enter one of the following commands:

# ./ql-dynamic-tgt-lun-disc.sh -i

# ./ql-dynamic-tgt-lun-disc.sh --interactive

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 121 122

Pas de commentaire

Qlogic QLE2362 Guide d'installation Page 105