Qlogic QLE2362 Guide d'installation télécharger pdf (Page 25)

Installing the adapter

Installation Steps

QLogic offers adapters for each bus/slot type available. Table 2

shows each of the EMC-supported QLogic adapters, and their

respective slot requirements. Be sure to consult both your server user

guide and QLogic to ensure that the adapter you want to use is

compatible with your server's bus.

Remember that some of the older adapters are tall (also referred to as

full-height) and may not fit into a server with a low-profile chassis.

These factors must be considered before implementing your

configuration to avoid unnecessary delays and possible equipment

swaps or returns.

Currently, the QLogic FCoE converged network adapters (CNAs)

require servers that can accommodate full-height, full-length PCI

Express adapters. Always refer to the EMC Support Matrix for the

most up-to-date information on which servers support these

adapters.

Table 2 Slot requirements of EMC-supported QLogic adapters

Adapter model Protocol PCI spec BUS length Power Slot key

QLA2200F FC PCI 2.1 64-bit 3.3V, 5V Universal

QLA200 FC PCI-X 1.0a & PCI 2.2 32-bit 3.3V, 5V 3.3V

QLA210 FC PCI-X 1.0a & PCI 2.2 32-bit 3.3V 3.3V

QLA2310F FC PCI-X 1.0a & PCI 2.2 64-bit 3.3V, 5V Universal

QLA2340LF FC PCI-X 1.0a & PCI 2.2 64-bit 3.3V, 5V Universal

QLA2342LF FC PCI-X 1.0a & PCI 2.2 64-bit 3.3V, 5V Universal

QLE2360 FC PCI Express x4 lane 3.3V n/a

QLE2362 FC PCI Express x4 lane 3.3V n/a

QLA2460 FC PCI-X 2.0a & PCI 2.3 64-bit 3.3V 3.3V

QLA2462 FC PCI-X 2.0a & PCI 2.3 64-bit 3.3V 3.3V

QLE2460 FC PCI Express x4 lane 3.3V n/a

QLE2462 FC PCI Express x4 lane 3.3V n/a

QLE220 FC PCI Express x4 lane 3.3V n/a

QLE2560 FC PCI Express x4 lane 3.3V n/a

QLE2562 FC PCI Express x4 lane 3.3V n/a

QLE8042 FCoE PCI Express x8 lane 3.3V n/a

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 121 122

Pas de commentaire

Qlogic QLE2362 Guide d'installation Page 25